Make room without guesswork.
A limited pilot for patterned through-pockets in a closed plate model. Use STL or select a supported 3MF body. Pocket placement and export validation run privately on the server.
1 · Upload a plate
Uploads are processed for this request and removed afterward. No source model is added to the public website.
Only the chosen closed body is pocketed. Selected-body STL omits the rest of the package; a Core-only review 3MF can retain other closed bodies, but refuses materials, slicer data, metadata and extensions rather than dropping them.
Select the axis perpendicular to the plate. The server rotates it to XY for cutting.
Rotates the plate and pocket layout in 90° steps after choosing the face. Original-orientation download puts the cut plate back where it was.
3MF review export keeps all closed Core bodies in their original orientation; it does not retain slicer settings or unsupported package data. Your uploaded file is never modified.
Compare with a reference photo
No photo selected. A photo is only a local visual overlay and never sets cut coordinates.
Visual comparison only. This does not calibrate scale or perspective, change protected areas, or send the photo to the server.
Inspect in 3D
Choose a model to preview in 3D.
Drag a rectangle, or tap 3–10 polygon corners and choose Finish polygon, on the source preview. Up to 12 areas; each must span at least 2 mm and the server validates them again. Turn polygon drawing off to cancel an unfinished outline.
2 · Pocket settings
Regular round through-pockets. No structural strength is implied.
74 · 32 mm cells. Higher density means smaller cells.
Available with every pattern; smaller round pockets are added only where the full web, edge, hole and protected-area clearances remain. Some layouts leave no room. The 128-pocket limit still applies.
Rounds polygon pocket corners inward. Circles and rounded slots are already curved.
Zero uses the outer edge margin. These bands are measured in the current XY orientation.
Optional lower target for the cut body; other 3MF bodies are unchanged. The server tries only conservative simplification and refuses the export if it cannot meet this target while preserving the checked openings.
Rename your download; this does not rename the uploaded original or the shared app.
Download STLThese are full-depth geometric pockets, not certified load-bearing designs. Axis-aligned plate orientations and source-preview rectangular or polygon protected regions are supported. Only plain Core 3MF packages with closed bodies are eligible for review export; STEP, calibrated photo matching, and strength analysis remain unavailable. Inspect every result in your slicer before printing.